65) Dimensionamiento de una batería para vivienda
La semana pasada desgrane la energía solar fotovoltaica necesaria para una vivienda unifamiliar con un consumo anual de 2200 kWh, donde comprendimos que el almacenamiento de energía es necesario para aprovechar los excedentes de las horas centrales del día y poder compensar la cola y la cabeza del famoso “Duck Curve”.
-𝘙𝘌𝘎𝘓𝘈 𝘱𝘢𝘳𝘢 𝘕𝘖 𝘚𝘖𝘉𝘙𝘌𝘋𝘐𝘔𝘌𝘕𝘚𝘐𝘖𝘕𝘈𝘙 𝘦𝘭 𝘢𝘭𝘮𝘢𝘤𝘦𝘯𝘢𝘮𝘪𝘦𝘯𝘵𝘰 𝘦𝘭é𝘤𝘵𝘳𝘪𝘤𝘰.
Se recomienda que el ratio (Potencia de la batería / Potencia solar instalada) sea cercano a 2.
Ya que valores muy altos, implicaría un coste excesivo y la necesidad de mucho tiempo para llenarlas (a cambio de disponer de un gran soporte). Sin embargo, ratios muy bajos no nos permiten autoabastecernos de una manera óptima, ya que no dispondremos de mucho respaldo en las baterías.
Desgraciadamente aunque se haya reducido +80% el precio en la última década, el precio de una batería es alto, pudiendo rondar 1000 €/kWh. En el caso tratado se ha valorado una batería de 5 kW, supone 5000 €.
No obstante, la evolución del sector, en gran medida debido a los vehículos eléctricos, hace prever que el coste seguirá bajando (a no ser que existan cuellos de botella por no ser capaz de cubrir la demanda).
¿En que fijarse a la hora de adquirir una batería?
-CAPACIDAD:
En primer lugar, tienes que pensar cuanto consumo quieres tener disponible en la batería almacenada. La capacidad de las baterías se mide en amperios hora (Ah), esa cifra en kWh tienes que dividirla entre el voltaje de la batería.
-PROFUNDIDAD de DESCARGA:
La profundidad de descarga indica el máximo recomendable que la batería se podría descargar sin riesgo. De esta forma, una batería con una profundidad de descarga del 70% solo podrá ofrecer el 70% de su carga teórica (por si tienes que acoplar otros módulos para obtener la capacidad que desea).
-DEGRADACIÓN:
Por norma las baterías pierden potencia con el transcurso del tiempo (como la batería del móvil o del ordenador), por lo tanto, es necesario aplicar un factor de corrección.
Finalmente, es interesante diferenciar entre 2 términos:
El 𝐚𝐮𝐭𝐨𝐜𝐨𝐧𝐬𝐮𝐦𝐨 es la proporción entre la energía que es consumida in situ directamente de la que se genera por la instalación.
La 𝐚𝐮𝐭𝐨𝐬𝐮𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐢𝐚 hace referencia a cuanta energía genera, del total de la demanda de la vivienda.
65) Sizing battery for home
Last week, I discussed the photovoltaic solar energy necessary for a single-family home with an annual consumption of 2,200 kWh, where we understood that energy storage is necessary to take advantage of the surpluses of the central hours of the day and to be able to compensate for the tail and head of the famous "Duck Curve".
-Rule not to oversize electrical storage.
It is recommended that the ratio (Battery power / Installed solar power) be close to 2.
Since very high values, it would imply an excessive cost and the need for a long time to fill them (in exchange for having great support). However, very low ratios do not allow us to self-supply in an optimal way, since we will not have much backup in the batteries.
Unfortunately, although the price has been reduced by +80% in the last decade, the price of a battery is high, and can be around €1000/kWh. In the case dealt with, a 5 kW battery has been valued, representing €5,000.
However, the evolution of the sector, largely due to electric vehicles, suggests that the cost will continue to fall (unless there are bottlenecks due to not being able to cover demand).
What to look for when buying a battery?
-ABILITY:
First of all, you have to think about how much consumption you want to have available in the stored battery. The capacity of the batteries is measured in amp hours (Ah), that figure in kWh you have to divide it between the battery voltage.
-DEPTH of DISCHARGE:
The depth of discharge indicates the maximum recommended that the battery could be discharged without risk. In this way, a battery with a depth of discharge of 70% will only be able to offer 70% of its theoretical charge (in case you have to couple other modules to obtain the capacity you want).
-DEGRADATION:
As a rule, batteries lose power over time (like mobile or computer batteries), therefore, it is necessary to apply a correction factor.
Finally, it is interesting to differentiate between 2 terms:
The self-consumption is the ratio between the energy that is consumed on site directly from that generated by the installation.
The efficiency refers to how much energy it generates, of the total demand for housing.